Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

End stop indicator, for NFB(X) / AFB(X)

Shaft clamp reversible, for central mounting, for damper shafts ø12.7 / 19.0 / 25.4 mm

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Actuator arm, for 3/4" shafts, clamping range ø10...22 mm, Slot width 8.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø14...25 mm

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Baseplate extension, for NFB(X) / AFB(X)

Baseplate extension, for NFB(X) / AFB(X)

Mounting bracket for AF..

Mounting bracket
for AF / NF

Dual actuator mounting bracket.

Mounting bracket

Linkage kit

Mounting bracket
for AF / NF

Jackshaft mounting bracket.

Mounting kit for linkage operation for flat and side installation

Mounting kit, for foot mount installation

Damper clip for damper blade, 3.5” width.

Damper clip for damper blade, 6” width.

1" diameter jackshaft adaptor (11" L).

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Linkage kit, Jackshaft RetroFIT+ Linkage with Belimo Rotary Actuators

Transformer, AC 120 V to AC 24 V, 40 VA

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Baseplate, for ZS-100

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Shaft extension, 1/2", for ZS-300

Shaft extension, 3/4", for ZS-300

Shaft extension, 1", for ZS-300

Cable conduit connector, 1/2"

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount