Baseplate extension for SM..A to SM../AM../SMD24R

Actuator arm for standard shaft clamp (reversible)

Shaft extension 240 mm ø20 mm for damper shaft ø12...21 mm CrNi

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Shaft clamp one-sided for NM..A, SM..A, clamping range ø8...26 mm
Multipack 20 pcs.

Shaft clamp one-sided for SM..A for CrNi (INOX), clamping range ø12...26 mm, for CrNi shaft (INOX)
Multipack 20 pcs.

Shaft clamp reversible for SM..A, NKQ..A, NMQ..A, clamping range ø10...20 mm

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm

Anti-rotation mechanism, 180 mm, for TM...A, LM..A, NM..A, TF
Multipack 20 pcs.

Anti-rotation mechanism, 230 mm, for LM..A / NM..A / SM..A / GM..A / EF..A / GK..A
Multipack 20 pcs.

Position indicator, for LM..A, NM..A, SM..A, GM..A
Multipack 20 pcs.

Terminal protection IP54
Multipack 20 pcs.

Form fit insert, 10x10 mm, for LMQ..A / NM..A / SM..A
Multipack 20 pcs.

Form fit insert, 12x12 mm, for LMQ..A / NM..A / SM..A
Multipack 20 pcs.

Form fit insert, 15x15 mm, for LMQ..A / NM..A / SM..A
Multipack 20 pcs.

Form fit insert, 16x16 mm, for LMQ..A / NM..A / SM..A
Multipack 20 pcs.

Mounting kit for linkage operation for flat installation

Auxiliary switch 1x SPDT add-on

Auxiliary switch 2x SPDT add-on

Feedback potentiometer 10 kΩ add-on

Feedback potentiometer 1 kΩ add-on

Feedback potentiometer 140 Ω add-on

Positioner for wall mounting, 0...100%, operating range selectable, 0...10 V or 2...10 V

Positioner for wall mounting

Positioner for built-in mounting

Positioner for front-panel mounting

FieldPower Box for MP-Bus IP20

Signal converter voltage/current 100 kΩ 4...20 mA, Supply AC/DC 24 V

MP-Bus power supply for MP actuators

Service tool for wired and wireless setup, on-site operation and troubleshooting. Platform-independent for Android, iOS and Windows

Service tool, with ZIP-USB function, for parametrisable and communicative Belimo actuators, VAV controller and HVAC performance devices

Adapter for Service-Tool ZTH

Connecting cable 5 m, A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socket

Connecting cable 5 m, A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminal

Gateway MP to BACnet MS/TP

Gateway MP to Modbus RTU